Golden Lighting 1030-WSC CH - Manual

Mounting Strap 1ea
Junction Box
Screw
2ea Mounting Screw 2ea
Wire Connnector 3ea Hex Nut 2ea
Deco Nut
(round nut)
2ea
Green Ground
Screw
1ea Shade Screw 2ea Finial 1ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Cerchi 1030-WSC CH
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement
parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
below to be filled out by retailer
For Customer Service, contact the place of purchase to arrange for replacement parts.
1030-WSC CH
Read and review installation instruction sheet before
assembling the fixture.
F IXTURE A SSEMBLY I NSTRUCTIONS
NOTE: I NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
ASSEMBLING THE FIXTURE (Fig.1)
1. Attach Bottom Panel (I) to bottom of Back Plate (H) and
slide Column Nipple (J) through Bottom Panel (I) and Bracket
(L). Fasten in place with Finial (K), tighten until snug.
* You may now install the fixture.
2. Install light bulb in accordance with the fixture's
specifications.
3. Secure the Shade (N) to Back Plate (H) with Shade
Screws (M).
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
Fig. 1
N M
A
H
I
B
J
O
L
K