Golden Lighting 1030-FM CH - Manual

Circular
mounting strap
1ea Wire connectors 3ea
Green ground
screw
1ea
Mounting screw 2ea Hex nut 2ea Diffuser
1ea
Junction Box
Screw
2ea Deco nut 2ea Finial 1ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Cerchi 1030-FM CH
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement
parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
1030-FM CH
Read and review installation instruction sheet before
assembling the fixture.
F IXTURE A SSEMBLY I NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I NSTALL THE DIFFUSER AFTER THE
FIXTURE IS HUNG.
ASSEMBLING THE FIXTURE (Fig.1)
1. Slide Shade (H) through Fixture Connector (G) and
secure Shade (H) to Frame (L) with Screws (K) .
Note: Complete these remaining steps after the fixture is
hung.
2. Install the light bulbs in accordance with the fixture's
specifications.
3. Slide Diffuser ( I ) to Shade (H) and secure in place by
threading Bottom Finial (J) to the Fixture connector (G).
(DO NOT EXCEED MAXIMUM WATTAGE RATING)
Fig 1
H
D
C
B
K
J
I
G
E F
L