Golden Lighting 1051-SF SBZ - Manual

Circular
Mounting strap
1ea
Mounting screws
8/32T*1-1/2"L
2ea Box Screw 2ea
Hex nut 2ea Deco or Ball Nut 2ea Bottom cap 1ea
Wire connectors 3ea Finial 1ea Nipple 1ea
Green screws 1ea
Rubber washer
Metal washer
1ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
F IXTURE A SSEMBLY I NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
1. This fixture is packed with the arms closed. Gently spread
the arms (F) until evenly spaced.
2. Slide Center Ring (J) up to the Arms (F) and make the screw
(G) through the hole of the Steel clip (I) ,secure with Ball nut (K).
3. Thread the Nipple (L) into the Socket assembly (H), lock into
position by the tightening hex nut.
4. Install the light bulbs in accordance with the fixture’s
specifications.
5. Slide the Glass shade (M), Rubber washer (N), Metal washer
(O) over the Nipple (L) secure them by the Hex Nut (P).
6. Slide the Bottom Cap (Q) over the Nipple (L), screw the
Finial (R) onto the Nipple (L) until tight.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING)
1051-SF SBZ
Read and review installation instruction sheet before
assembling the fixture.
Fig 1
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Hidalgo 1051-SF SBZ