Golden Lighting 1051-FM SBZ User Manual
Parts & assembly sheet, Parts list
Mounting strap
1ea
Mounting screws
8/32T*1-1/4"L
2ea
Fixture Mounting
screws
8/32T*1-1/2"L
2ea
Hex nut 3/8"
4mm
2ea
Finial
1ea
Green screw
1ea
Nipple
1ea
Bottom Cap
1ea
Metal Washer
1ea
Wire connectors 3ea
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
For Customer Service, contact the place of purchase to arrange for replacement parts.
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
1051-FM SBZ
1. Thread the Nipple (G) into the Coupling (E), and then
thread the Hex Nut (F) onto Nipple (G) until tight.
2.Install the light bulbs in accordance with the fixture's
specifications.
3. Place Glass Shade (H) over the Ceiling Pan (D). The
Nipple (G)shall protrude the bottom hole of the Glass Shade
(H).
4. While holding the Glass Shade (H) slide washer(J) over
Nipple (G) and thread Hex nut (K) until tight.
5. Slide Bottom Cap (L) over Nipple (G) and thread the Finial
(M) until tight.
(DO NOT EXCEED THE MAXIMUN WATTAGE RATING)
Fig 1
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
PARTS & ASSEMBLY SHEET
Fixture Name: Hidalgo 1051-FM SBZ
This fixture assembled PO:__________ Date: ________
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer