Golden Lighting 1030-SF CH User Manual
Parts & assembly sheet, Parts list
Canopy
1ea
Screws
2ea Top
loop
1ea
Mounting
Strap
1ea
Spring Washer
1ea
Mounting Strap 1ea
Chain
6ft
Wire
Connectors
5ea
Nipple
1ea
Chain
connector
2ea
Mounting
Screws
4ea
Deco Nut
2ea
Canopy Loop
with Collar
1ea
Hex Nut
2ea
Finial
1ea
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
Fixture Name: Cerchi 1030-SF CH
This fixture assembled PO:__________ Date: ________
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts
are missing or damaged, please note on this sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
Read and review installation instruction sheet
before assembling the fixture.
1054-SF ST
ASSEMBLING THE FIXTURE as Semi flush (Fig. 1)
1. Grasp the fixture wires and align the Fixture Nipple to
socket assembly coupler (G) and thread together until
tight. Ensure the fixture wires are not pinched in the
coupler.
2. Gently spread the Frame arms (Y) until evenly spaced
if arms are packed closed.
3. The Center column rings may be turned to your
desired angle.
4. Slide Shade (H) through Fixture connector (K) and
secure Shade (H) to Arms (Y) with Screws (N).
Note: Complete these remaining steps after the fixture
is hung.
5. Install light bulbs in accordance with fixture's
specifications.
6. Slide Diffuser ( I ) to Shade (H) and secure in place by
threading Bottom Finial (J) to the Fixture connector (K).
(DO NOT EXCEED MAXIMUM WATTAGE RATING)
Fig 1
NOTE: I
NSTALL THE DIFFUSER AFTER THE
FIXTURE IS HUNG.
For Customer Service, contact the place of purchase to arrange for replacement parts.
L
K
J
I
H
G
F
E
B
Y