Golden Lighting 1051-M1L SBZ - Manual

Circular
Mounting strap
1ea
Mounting screws
8/32T*1-1/2"L
2ea Box Screw 2ea
Green screws 1ea Deco or Ball Nut 2ea Wire connectors 3ea
Rod 3 ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
For Customer Service, contact the place of purchase to arrange for replacement parts.
4. Place the Glass Shades (J) over the Threaded
Sockets(I) and secure by threading the Socket Ring (K)
to Threaded Socket (I) until tight..
5. Install the light bulbs in accordance with the fixture's
specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING)
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
1051-M1L SBZ
1. By measuring determine correct number of rods
needed for proper hanging height. There are 3 optional
12" rods included.To shorten the fixture slide the excess
12" rods off the wire.To lengthen the fixture thread the
additional rods onto the wire.
2. Pull the fixture's wire through the Rods (G).
3. Thread Rod/rods (G) into Fixture frame (H) using the
nipples until tight, repeat for the additional rods. Thread
the Swivel assembly (F) to the Rod (G).
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
PARTS & ASSEMBLY SHEET
Fixture Name: Hidalgo 1051-M1L SBZ
This fixture assembled PO:__________ Date: ________
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer