Identification register definitions, Scan register sizes, Instruction codes – Cypress CY7C1410JV18 User Manual
Page 17
CY7C1410JV18, CY7C1425JV18
CY7C1412JV18, CY7C1414JV18
Document #: 001-12561 Rev. *D
Page 17 of 26
Identification Register Definitions
Instruction Field
Value
Description
CY7C1410JV18
CY7C1425JV18
CY7C1412JV18
CY7C1414JV18
Revision Number
(31:29)
001
001
001
001
Version number.
Cypress Device ID
(28:12)
11010011010000111 11010011010001111 11010011010010111 11010011010100111 Defines the type of
SRAM.
Cypress JEDEC ID
(11:1)
00000110100
00000110100
00000110100
00000110100
Allows unique
identification of
SRAM vendor.
ID Register
Presence (0)
1
1
1
1
Indicates the
presence of an ID
register.
Scan Register Sizes
Register Name
Bit Size
Instruction
3
Bypass
1
ID
32
Boundary Scan
109
Instruction Codes
Instruction
Code
Description
EXTEST
000
Captures the input and output ring contents.
IDCODE
001
Loads the ID register with the vendor ID code and places the register between TDI and TDO.
This operation does not affect SRAM operation.
SAMPLE Z
010
Captures the input and output contents. Places the boundary scan register between TDI and
TDO. Forces all SRAM output drivers to a High-Z state.
RESERVED
011
Do Not Use: This instruction is reserved for future use.
SAMPLE/PRELOAD
100
Captures the input and output ring contents. Places the boundary scan register between TDI
and TDO. Does not affect the SRAM operation.
RESERVED
101
Do Not Use: This instruction is reserved for future use.
RESERVED
110
Do Not Use: This instruction is reserved for future use.
BYPASS
111
Places the bypass register between TDI and TDO. This operation does not affect SRAM
operation.