Golden Lighting 3500-SF AB User Manual
Parts & assembly sheet, Parts list
Mounting strap
(circular)
Wire connectors
Deco nut
1ea D4"
3ea P3 Orange
2ea 12mm
Canopy
Junction box
screw
Top loop
1ea D6"X1"
2ea 8/32" x 1"
1ea D50 x 60mm
Chain
Mounting screw
1ea 6ft x3.8mm
2ea 8/32" x 1-1/4"
1ea @3/8 x 40mm x 5mm
Chain
connector
Hex nut
Nipple
2ea @3X38mm
2ea @3/8 x 3mm
1ea @3/8 x 65mm
Mounting strap
w/ ground screw
Screw
1ea 3/4"X4"
2ea @8/32" x 8mm
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note on this sheet and contact the place of purchase to arrange for replacement
parts.
For Customer Service, contact the place of purchase to arrange for replacement
parts.
Canopy loop
with Collar
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
Read and review installation instruction sheet
before assembling the fixture.
3500-SF AB
1. Place shade (Q) Thread the threaded
pipe/stem (P) into the coupling at center of
fixture body (R).
2. Thread the top loop (J) onto the stem
(P1)and(P). Hand-tighten until the Top Loop is
snug.
3. Install the light bulbs in accordance with the
fixture's specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING)
Fixture Name: Waverly 3500-SF AB
This fixture assembled PO:__________ Date: ________
Fig. 1
PARTS LIST
Company Name:_______________________ Co. Account #:____________
to be filled out by retailer