beautypg.com

2 selecting local management menu screen items, 3 exiting local management screens, Selecting local management menu screen items -11 – Cabletron Systems 2E48-27R User Manual

Page 57: Exiting local management screens -11, Figure 5-6, Refer to the appropriate figure that

background image

Accessing Local Management

2E48-27R/2E49-27R User’s Guide

5-11

Figure 5-6

SecureFast VLAN Mode, LM Screen Hierarchy

5.4.2

Selecting Local Management Menu Screen Items

Select items on a menu screen by performing the following steps:

1.

Use the arrow keys to highlight a menu item.

2.

Press ENTER. The selected menu item displays on the screen.

5.4.3

Exiting Local Management Screens

There are two ways to exit the Local Management (LM) screens.

Using the Exit Command

To exit LM using the EXIT screen command, proceed as follows:

1.

Use the arrow keys to highlight the EXIT command at the bottom of
the Local Management screen.

2.

Press ENTER. The Local Management Password screen displays and
the session ends.

Device
Menu

Password

Device
Configuration
Menu

19602-83

Device Specific
Configuration Menu

Network Tools

Device
Statistics
Menu

System
Resources

High Speed
Interface
Configuration
Flash Download

Fast
Ethernet
Interfaces

HSIM

Interface Statistics

RMON Statistics

General Configuration
SNMP Community Names
SNMP Traps

Ethernet Full Duplex
Configuration

Port Redirect
Function

This manual is related to the following products: