Cabletron Systems 2E48-27R - Manual (Page 101)

FLASH Download Screen
2E48-27R/2E49-27R User’s Guide 5-55
3. Use the LEFT-ARROW key to move back to the Advertised Ability
selection and use the SPACE bar to select the next mode to enable or
disable.
4. Use the RIGHT-ARROW key to move across to the
Enabled/Disabled field to the right of the selection.
5. Use the SPACE bar to select Enabled or Disabled. Press ENTER.
Continue this process until you have completed enabling or disabling
the advertised modes.
6. Use the arrow keys to highlight the SAVE command. Press ENTER.
The message “SAVED OK” displays and Local Management saves
the changes to memory.
5.16 FLASH DOWNLOAD SCREEN
The Flash Download screen, shown in Figure 5-24 , allows the user to
replace the information stored in the 2E4X-27R FLASH memory with a
new image file downloaded from a TFTP server.
Before downloading an image to the device, copy the image to the
network TFTP server.
NOTE
The user may also force the download of an image by changing
the position of Switch 6 located inside the device. Refer to
Section C.2.1 , Setting the Mode Switches , for details.
NOTE
For information on how to set up a workstation as a TFTP
server, refer to the specific workstation documentation.