Garelick 71092 MOTOR BRACKET User Manual
Page 4
gasket, and cover on the reservoir. Add
hydraulic oil such that it comes to within 1/4" to
3/8" from the top. Reattach the cover with the
screws and gasket. Remove the safety lock and
cycle the system through the full range of motion
2 times. If the system does not reach full height
repeat this process.
Installation Instructions for
Auxilliary Hydraulic Outboard Motor Bracket
Form 12.575
Write for
a Complete
Catalog
644 2nd Street, PO Box 8
St. Paul Park, Minnesota 55071
Phone: 651-459-9795
E-mail: [email protected]
Website: www. garelick.com
04/06
Model No: 71092
Cover Plate
Gasket
Reservoir
Cover Screws