Garelick 12360 FOLDING PONTOON LADDER - Manual

Instructions for: 12360 SERIES
FOLDING PONTOON LADDER
Write for GARELICK Phone: 651-459-9795
A complete 644 2
ND
Street, PO Box 8 E-mail: [email protected]
EEz-In Catalog St. Paul Park, Minnesota 55071 Website: www.garelick.com
04/10
12.620
MOUNTING INSTRUCTIONS
Thank you for selecting our superior quality Garelick
EEz-In Brand Boarding Ladder. Your ladder was
designed and manufactured using the finest material
available to provide long product life. Choosing the
proper size ladder for location and correct fit is
important to assure safe, convenient, and reliable use.
Although mounting hardware is not provided due to
the wide variety of applications and diversity of boat
shapes and sizes mounting holes have been provided
and it is recommended to use at a minimum 1/4"
diameter fasteners. These fasteners should be through
bolted with a backing plate.
SAFETY GUIDELINES
• No jumping or diving!
• Do not use when motor is running
• This ladder designed for boat use only
• Face ladder when entering boat or water
• Only one person on ladder at a time
• Check all steps and hardware before using
• Never operate your boat with the ladder in
“down” position. Serious injury, or damage to
your boat or ladder may result.
• When underway, fold ladder up and
secure using the Velcro strap provided.
MAINTENANCE
•
Safety tip
Periodically check mounting hardware and re-
tighten (due to normal boat operation.)
•
Keep that bright finish!
Local weather conditions may contribute to
minor corrosion. Stainless, like other metals, is
not completely free from corrosion attack.
Regular fresh water rinsing and periodic cleaning
with a mild abrasive cleaner will help to retain
luster.
GENERAL ASSEMBLY INSTRUCTIONS:
Step 1: Assemble the (2) U-channels to the (2) top
verticals by using (4) 1/4-20 x 1 5/8" machine screws
with (4) 1/4-20 locknuts.
Step 2: Insert (6) black caps into the end of the top
vertical as well as into the ends of the bottom verticals.
-For ease of assembly
secure the hook end first
then attach the opposite
end.
-Fastener heads should
always face into the
ladder
U-Channel
Top Vertical
Black Cap
1/4-20 Screw
and Locknut