Garelick 12360 FOLDING PONTOON LADDER User Manual
Page 3
Instructions for: 12360 SERIES
FOLDING PONTOON LADDER
Write for GARELICK Phone: 651-459-9795
A complete 644 2
ND
Street, PO Box 8 E-mail: [email protected]
EEz-In Catalog St. Paul Park, Minnesota 55071 Website: www.garelick.com
04/10
12.620
Step 6: Attach the standoffs to one of the black steps.
Choose the step that best suits your application and
aligns with the pontoon accordingly to provide the
most support.
Step 6A: Punch holes into the black step by using the
1/4-20 screw provided in the hardware bag. Align the
screw with the hole on the bottom of the black step and
strike with a hammer to pierce a hole as shown.
Step 6B: Using the hole that was punched in step 6A
assemble the standoff to the step as shown.
Step 7: Attach the Velcro strap to one of the top
verticals to secure the bottom vertical section in the up
position when not in use.
Step 8: Product is now ready to be installed onto the
boat and ready to be used. Ensure all fasteners are
secure and tight.
PARTS LIST
Part
Number
Bagged
Parts
Description
QTY
08.878
MTG BRKT, U CHANNEL
2
49.782
STANDOFF HARDWARE BAG
1
03.079
1/4‐20 X 1 1/2 MACHINE
SCREW
2
03.221
1/4‐20 LOCKNUT
2
10.001
WHITE TIP
2
50.012
STANDOFF
1
60.753
TOP VERTICAL
2
60.754
BOTTOM VERTICAL
2
60.755
BLACK STEP
3
60.758
HDW BAG 12360
1
03.103
#10 X 2 SCREW
6
03.221
1/4‐20 LOCKNUT
8
03.842
1/4‐20 X 1 5/8" MACHINE
SCREW
8
06.1660 PINCH GUARD
2
06.184
FLAT BLACK PLUG
6
49.205
STRAP, VELCRO
1
50.124
HINGE
2
1/4-20 Screw and Locknut
Stand-off
Insert the strap through
itself into a loop as
shown.
Pull strap tight and wrap it around opposite
tube to secure ladder assembly together in
the up position.