At the tv, At the vcr, Choose the tape speed – Philips VR650 User Manual
Page 11: Choose the channel, Start recording, Pause recording, Stop recording, Timer recording -16, Record on a tape 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Record on a Tape 11
r„
record on a cassette tape, follow steps 1-7 below. Read all the instructions before starting. You must use your
remote control.
Power ON:
Select channel
3or4.
] Make sure — |-------------------------------
the steps in “Hook Up Your VCR” on pages 7-8 have been
completed.
At the TV
1
Turn the TV on. Turn to channel 3 if the VCR CH3/CH4 switch is
set to “CH3.” Turn to channel 4 if the VCR is set to “CH 4.”
STOP Button
At the VCR
Insert a cassette with the record tab in place.
The power will come on.
If the cassette is already in the VCR, press the POWER button.
If the VCR display lights on the VCR, do nothing.
If it isn’t, press the TVA^CR button.
REC(ord)
Cassette CHANNEL
Button
Tape
UP/DOWN
Buttons
Choose the Tape Speed
(You may skip this step if the desired tape speed is already
selected.)
Press the Tape SPEED button on the remote control until the desired
tape speed (SP, SLP) appears on the TV screen.
STOP
Button
Tape SPEED
Button
NUMBER
Buttons
EBBI
BJE o
•-,-14 S'A'-S O-f«
O <=) o
PAUSE/STILL
Button
VCR
CH(annel)
UP/DOWN
Buttons
Choose the Channel
I Press the VCR CH(annel) UP/DOWN or NUMBER buttons to
select the channel to be recorded.
Start Recording
Press the REC(ord) button.
REC(ord)
Button
Pause Recording
I To pause, press the PAUSE/STILL button. To continue recording,
press this button again.
Remote Control
Stop Recording
1
To stop, press the STOP button.
Other recording options are available on
pages 14-16,19.
Now, go to the next page and learn how to record one channel while
watching another.