At the tv, At the vcr, Start playback – Philips VR650 User Manual
Page 10: Step playback, 10 play a tape
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
“10 Play a Tape
'’o play a tape, follow steps 1-4 below.
] Make sure... |--------------------------------------
the batteries are loaded in the remote control and the connections on
pages 7 and 8 have been completed before continuing to the steps
below.
At the TV
Turn the TV on. Set the TV to the same channel as the switch on the
back of the VCR (CH3/CH4).
At the VCR
1
Insert a cassette.*
The VCR Power will come on.
Start Playback
Press the PLAY button.
• The VCR mode is automatically set. “VCR” indicator will light.
Step Playback
I Press the STOP/EIECT button to stop playback.
Press the REW(ind) button to fully rewind the tape.
Press the STOP/EJECT button again to remove the tape.
* • If a cassette’s record tab is removed, playback starts
automatically.
• If a cassette is already in the VCR, just press the POWER button.
Now, turn to the next page and leam how to record a TV program.