Preparation for recording, One touch recording, Dubbing tapes – Philips FW-C500 User Manual
Page 46: Cd synchro recording, Tape operation/recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tape Operation/Recording
IMPORTANT!
- Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
- Recording is possible only on tape deck 2.
Preparation for Recording
1
Press
TAPE
(TAPE 1 -2) to select TAPE 2.
2
Load a recordable tape into tape deck 2 with full
spool to the left.
3
Prepare the source to be recorded.
CD
~ load the disc(s).
TUNER
~ tune to the desired radio station.
TAPE
- load the prerecorded tape Into tape
deck 1 with the full spool to the left.
AUX
- connect external equipment.
When recording is in progress
«iBa starts flashing.
•
It Is not possible to listen to another source
except for dubbing tapes.
•
It Is not possible to activate the timer function.
One Touch Recording
1
Press
CD, TUNER
or
AUX
to select the
source.
2
Start playback of the selected source.
3
Press
REC
to start recording.
To stop recording
Press ■.
Recording and disc playback will stop
simultaneously
Dubbing Tapes
Load the prerecorded tape In tape deck 1.
You can set the tape to the desired passage
where recording will start.
Press
DUBBING
Playing and recording will start simultaneously.
"HIJH uuu"
will be displayed.
Dubbing of tapes is possible on one side of the
tape only To continue record on the reverse
side, at the end of side A, flip the tapes to side B
and repeat the procedure.
To stop dubbing
Press ■.
Notes:
-
Dubbing of tapes is possible only from tape
deck 1 to tope deck
2.
-
To ensure good dubbing, use tapes of the same
length.
-
You can listen to another source while dubbing.
To stop recording
Press ■.
Note:
— One Touch Recording Is not possible in TAPE
mode,
"oELEfT EElilREE"
will be displayed.
CD Synchro Recording
Press
CD 1" 2*3
to select the disc.
Press N or ►! to select the desired track to
start recording.
You can program the tracks in the order you
want them to be recorded (refer to “CD
Operation - Programming the disc tracks”).
Press
REC
to start recording.
The disc will start playback automatically.
To select another track during recording
Press
PAUSE
II to interrupt recording.
Press N or P-l to select the desired track.
Press
PLAY
► to resume recording.
24