Philips FW-C500 - Manual (Page 43)

Radio Reception
Notes:
- If you attempt to store more than 40 preset
radio stations, "Pf?uljK'RM FLILL" will be
displayed.
- During programming, if no button is pressed
within 20 seconds, the system will exit the Program
mode automatically.
Tuning to Preset Radio Stations
Once you’ve preset the radio stations, press N
or ►! to select the desired preset number
The preset number; radio frequency, and
waveband will appear on the display.
Erasing a Preset Radio Station
Press N or ►! to select the preset radio station
to be erased.
Press and hold ■ on the system until “PRioi !
I'FuEfcjj" appears on the display
The radio frequency remain on the display.
“> The preset numbers of all other preset radio
stations in the band with higher numbers are
now decreased by one.
Repeat steps 1-2 to erase other preset radio
stations.
For Recording, please refer to “Tape
OperationIRecording".
External Sources
Listening to External Sources
Connect the audio out terminals of the external
equipment (TV,VCR, Laser Disc player; DVD
player or CD Recorder) to the AUX/CDR IN
terminals of your system.
Press AUX (CDR/DVD) repeatedly to select
CDR/DVD mode or normal AUX mode,
-> "LjjP/riLII" or"Ru'L" will be displayed.
If the sound from the external source Is
distorted, select CDR/DVD mode for listening.
Notes:
- You are advised not to listen to and record from
the same source simultaneously.
- All the navigation sound control features (DSC
or VAC, for example) are available for selection.
~ Refer to the operating instructions for the
connected equipment for details.
For Recording, please refer to "Tape
OperationIRecording”.
21