Philips FW-C500 - Manual (Page 41)

Radío Reception
Storing Preset Radio Stations
You can store up to 40 preset radio stations in
the memory.
Automatic Preset Programming
Plug and Play setting (refer to “Basic Functions -
Plug and Play").
OR
Press TUNER (FM* *AM) to select TUNER
mode.
-> "I uiMIPIP" will be displayed. A few seconds
later; the current radio frequency will be
displayed.
^ If a FM station is received in stereo, co will
appear on the display
To begin automatic preset from a desired
preset number
Press
N
or ►! to select the desired preset
number
For those radio stations that had been stored
in one of the preset will not be restored again to
another preset number
Press and hold PROG until "FILi'Fu" appears on
the display.
-> PROG will start flashing.
The system will start searching for all radio
stations on the FM band and then the AM band.
All available radio stations with sufficient signal
strength will be stored automatically.
The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
-> The last preset radio station will then be
played when completed.
To stop storing the automatic preset
• Press PROG or ■ on the system.
Note;
- If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
Manual Preset Programming
1
Press TUNER (FM*AM) repeatedly to select
the desired waveband : FM or AM.
2
Press PROG
-> PROG will Start flashing.
The next available preset number will be
displayed for selection.
3
Press and hold « or
►►
until the frequency
indication starts to change, then release.
-> The display will show 'Sfl-lROh'" until a radio
station with sufficient signal strength is found.
To store the radio station to another
preset number
• Press
N
or
N
to select the desired preset
number
4
Press PROG again to store the radio station,
PROG will disappear from the display.
• Repeat steps 2-4
to store other preset radio
stations.
Tuning to a weak radio station
# Press or ►► briefly and repeatedly until the
optimal reception is found.
To stop storing the manual preset
# Press ■ on the system.
20