Philips FW-C500 - Manual (Page 21)

Preparations
FM Antenna
• For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
ternninal.
Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
(FRONT) terminals, right speaker to "R" and left
speaker to "L", colored (marked) wire to " +"
and black (unmarked) wire to ",
• Clip the stripped portion of the speaker wire as
shown.
Notes:
- For optimal sound performance, use the
supplied speakers.
- Do not connect more than one speaker to any
one pair of +1 — speaker terminals.
- Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Optional Connection
The optional equipment and connecting cords
are not supplied. Refer to the operating
instructions of the connected equipment for
details.
Connecting other equipment to your
system
Connect the audio left and right OUT terminals
of a TVVCR, Laser Disc player DVD player or
CD Recorder to the AUX/CDR IN terminals.
Note:
- If you are connecting equipment with a
monaural output (a single audio out terminal),
connect it to the AUX/CDR IN left terminal.
Alternatively, you can use a “single to double” cinch
cable (still be mono sound).
Inserting batteries into the
Remote Control
Insert two batteries (Type R06 or AA) into the
remote control with the correct polarity as
indicated by the + and — symbols Inside the
battery compartment
CAUTION!
- Remove batteries if they are exhausted
or not to be used for a long time.
- Do not use old and new or different
types of batteries in combination.
- Batteries contain chemical substances, so
dispose of them properly.
d-
(i
(g
1Q