Philips FW-C500 - Manual (Page 29)

Basic Functions
Switching the system on
In Standby/Demonstration mode
Press STANDBY ON
The system will switch to the last selected
source.
Press CD, TUNER, TAPE, AUX (or CD 123,
TUNER, TAPE 1/2 orAUX/CDRon the
remote control).
The system will switch to the selected source.
Press any one of the DISC DIRECT PLAY
buttons or OPEN'CLOSE.
-> The system will switch to CD mode.
In Eco Power Standby mode
(for model
FW-C550 only)
Press ECO POWER
-> The system will switch to the last selected
source.
Press CD 123, TUNER, TAPE 1/2 or AUX/
CDR on the remote control.
The system will switch to the selected source.
Switching the system to Standby
mode
In Demonstration mode
Press and hold DEMO STOP
system.
on the
In any other source mode (except Eco
Power Standby mode)
Press STANDBY ON (or (!) on the remote
control).
^ The clock will appear on the display when the
system Is In Standby mode.
Switching the system to Eco
Power Standby mode (< 1 Watt)
(for model FW-C550 only)
Press ECO POWER (or press and hold (!) on
the remote control).
-> "ECu PuL'TR" will be displayed, then the
display screen will go blank.
^ The low power ECO POWER LED will be
lighted.
Note:
- If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power Standby or Standby mode.
Power Saving Automatic Standby
As a power-saving feature, the system will
automatically switch to Standby mode If you do
not press any buttons within 30 minutes after a
disc or tape has stopped playing.
Display mode
There are four different display modes for
selection.
Press DISPLAY repeatedly to select NORMAL,
MODE 1, MODE 2, or MODE 3.
NORMAL.......... All available LEDs will light up
and the display screen will have
full brightness. TheVU will be in
music mode.
MODE 1............ All available LEDs will light up
and the display screen will have
full brightness. TheVU will be In
volume mode.
MODE 2............ All available LEDs will light up
and the display screen will be at
half brightness. TheVU will be in
music mode.
MODE 3............ The display screen will be at half
brightness. TheVU and all LEDs
will be off
Volume Control
Adjust VOLUME to Increase (turn knob
clockwise or press VOLUME +) or decrease
(turn knob counter-clockwise or press
VOLUME —) the sound level.
To listen through the headphones
Connect the headphones plug to the socket
at the front of the system.
The speakers will be muted.
To switch off the volume temporarily
Press MUTE on the remote control.
-♦ Playback will continue without sound and
TIuTE"
will be displayed.
To restore the volume, press MUTE again or
increase the VOLUME level.
14