Philips FW 72C - Manual (Page 19)

TUNER
Storing Preset Radio Stations___________
You can store up to 40 radio stations in the memory.
When a preset radio station is selected, the preset
number appears next to the frequency on the display.
Automatic programming
1 Press TUNER
2 Press TUNER (BAND) again to select the desired
waveband: FM or AM.
3 Press PROGRAM for more than one second.
The PROGRAM flag starts flashing and ‘RuTO' will
be displayed.
-* Every available radio station will be stored
automatically. The frequency and preset number
will be displayed briefly.
— The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
— The system will remain tuned to the last stored
preset radio station.
• Repeat the above procedure to store other preset
stations for the other waveband. Remember to select
the next available preset number before proceeding. If
not, some of the preset radio stations may be erased.
Notes:
-
You can cancel the automatic programming by
pressing PROGRAM or STOP ■ .
- If you want to reserve a section of preset numbers, for
example preset numbers 1 to 9, select preset 10
before starting automatic programming: now only the
preset numbers 10 to 40 will be programmed.
Manual programming
1 Press TUNER
2 Press TUNER (BAND) to select the desired
waveband: FM or AM.
3 Press PRDGRAM for less than one second.
The PROGRAM flag, frequency and preset number
start flashing.
The next available preset number will be displayed
for selection.
4 Press TUNING or ►► to tune to the desired
frequency.
• When all 40 presets are stored, no preset number is
shown.
The message "PROBRnil f u L L " will be
displayed.
• If you wish to store the radio station to another preset
number, press PRESET T or A to select the desired
preset number.
5 Press PROGRAM again.
-* The PROGRAM flag will stop flashing, and the radio
station will be stored.
• Repeat the above procedure to store other preset radio
stations.
Notes:
- You can cancel tbe manual programming by pressing
STOP m.
- During programming, If no button is pressed within 20
seconds, the program mode will exit automatically.
Tuning to Preset Radio Stations_______
• Press PRESET T or A to select the desired preset
number.
The preset number, frequency and waveband
appear on the display.
19