Philips FW 72C - Manual (Page 14)

OPERATING THE SYSTEM
Switching the system ON
Important:
Before you begin operating the system, complete
the preparation procedures.
Demonstration mode_________________
The system has a demonstration mode that shows the
various features offered by the system. Whenever the
system is switched on from the wall socket, the
demonstration mode will start automatically.
Notes:
~ During demonstration mode, if you press any source
(or standby-on) button, the system will switch to the
respective (or standby) mode.
- When the system is switched to standby mode, 5
seconds later, the demonstration mode will begin
again.
To cancel demonstration mode
• Press and hold STOP ■ (on the system only) tor 3
seconds to stop the demonstration.
The demonstration mode will be switched off
permanently.
Easy Set (only in standby or Demonstration mode)
EASY SET allows you to store all available radio stations
in a particular band (FM»AM) automatically (see Easy
Set under TUNER section).
• Press STANDBY*ON (on the system only), CD,
TUNER, TAPE orAUX
You can also switch on the system by pressing any one of
the 3 CD DIRECT PLAY buttons.
Switching the system to standby mode
• Press STANDBY*ON again.
Selecting the Source
Press the respective source selection button: CD,
TUNER, TAPE orAUX
The display indicates the selected source.
Note:
For an external source, make sure you have connected
the audio left and right OUT terminals of the external
equipment (TV, VCR, Laser Disc or DVD player) to the
AUX IN terminals.
14