Philips FW 72C - Manual (Page 11)

PREPARATION
(A)
AM Antenna Connection_____________
Connect the supplied loop antenna to the AM AERIAL
terminal. Place the AM loop antenna far away from the
system and adjust its position for the best reception.
® FM Wire Antenna Connection_________
Connect the supplied FM wire antenna to the FM 300 Q
terminal. Adjust the position of the FM antenna for the
best reception.
Outdoor Antenna
For better FM stereo reception connect an outdoor FM
antenna to the FM AERIAL 300 Q terminal using a 300
dipole wire.
(c) Speaker Connection________________
• Connect the right speaker to Eront terminal R, with the
red wire to + and the black wire to ~.
• Connect the left speaker to Eront terminal L, with the
red wire to + and the black wire to —.
• Clip the stripped portion of the speaker wire as shown.
UNLOCK LOCK
@ Rear Surround Speakers'
Connection______________________
• Connect the supplied surround speakers (model SS-
15R) to enhance the surround effect. The surround
speakers should be placed at normal listening ear
level or mounted on the wall at the back of the room.
• Connect the black or non-marked wires to the black
REAR terminals and the white or marked wires to the
greg REAR terminals.
FRONT
LEFT
FRONT
RIGHT
0; IM 0
iin REAR/SURROUND
fight
(D Connecting other equipment to your
system__________________________
You can connect the audio left and right OUT terminals of
a TV, Laser Disc player, VCR or DVD player to the AUX IN
terminals at the rear of the system.
0 Subwoofer Out Connection___________
You can connect either an optional active subwoefer or
an optional wireless active subwoofer to the
SUBWOOEER OUT terminal. The wireless system uses a
radio frequency transmitter. The subwoofer reproduces
just the low bass effect (e.g. explosions, the rumble of
spaceships, etc.). Be sure to follow the instructions
supplied with the subwoofer.
© AC Power Supply
After all other connections have been made, connect the
AC power cord to the system and to the wall outlet.
Inserting batteries into the Remote
Control____________________________
• Insert the batteries (Type R03 or AAA) into the
remote control as shown in the battery compartment.
• To avoid damage from possible battery leakage,
remove dead batteries or batteries that will not be
used for a long time. For replacement, use type R03 or
AAA batteries.
Notes for remote control:
- First select the source you wish to control by pressing
one of the source select buttons on the remote control
(e.g. CD. TUNER. TAPE 1/2 or AUXj.
- Then select the desired function (PLAY. NEXT. etc.).
11