Philips FW 72C - Manual (Page 18)

S’
CD
Shuffle (only on remote control)
TUNER
It will play all the available discs and their tracks in
random order. Shuffle may also be used when tracks are
programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE
— "GMUffLC" will be displayed.
— The SHUFFLE flag, the disc and the track selected
at random appear on the display.
• The discs and the tracks will now be played in random
order until you press STOP ■ .
• If you press REPEAT during shuffling, the current track
will be played repeatedly.
— The REPEAT and SHUFFLE flags will be displayed.
2 Press SHUFFLE again to resume normal playback.
-*■ The SHUFFLE flag disappears from the display.
Note:
- All the available discs and tracks will be played once,
then stop.
Repeat (only on remote control!
It will play the current track repeatedly.
1 Press REPEAT during playback.
-* 'VfTPPHT if?nPK" will be displayed.
The REPEAT flag and the track selected appear on
the display.
• The track will now be played repeatedly until you
press STOP ■.
2 Press REPEAT again to resume normal playback.
-* The REPEAT flag disappears from the display.
Easy Set (only in Standby or Demonstration mode) Tuning to Radio Stations
EASY SET allows you to store all available radio stations
in a particular band (FM*AM) automatically.
• Press and hold STANDBY«ON (on the system only)
for 2 seconds.
— ТПБЧ Б Е Т " will be displayed and followed by
"ТЬТч'ЕР".
Easy set will start with the last active band.
— All available radio stations with sufficient signal
strength will be stored or until 40 presets are filled.
Notes :
- When EASY SET is used, all previously stored stations
will be erased.
- The last preset station will appear on the display
when Easy Set is completed.
Press TUNER to select TUNER mode.
-* "TilNER" will be displayed.
The preset number, frequency and waveband
appear on the display.
Press TUNER (BAND) again to select the desired
waveband: FM or AM.
Press TUNING ◄ ◄ or ► ► for more than one second,
then release.
-*■ The display will show "EEHREH" until a radio
station with sufficient signal strength is found.
Repeat this procedure until the desired radio station is
reached.
To tune to a weak station, briefly press TUNING MM
or ► ► until the display shows the desired frequency
and/or when the best reception has been obtained.
18