beautypg.com

Adjustments and flight techniques – Futaba 8SSAP User Manual

Page 38

background image

ADJUSTMENTS AND FLIGHT TECHNIQUES

INDEPENDENT AILERON DIFFERENTIAL OPERATION

• Adjustment of the Aileron Differential can help

reduce sideslip in turns and eliminate unwanted
Yaw movements in rolling maneuvers.

• Install and connect the servos as shown in Fig.

71. Always connect the Right Aileron servo to

CH1 (Aileron). The Left Aileron servo is con-
nected to CH7.

• Set Switches 16 and 17 as shown in Fig. 70.
• The Aileron DOWN deflection can be adjusted

by using trimmer 15 .

• The differential amount increases as trimmer 15

is turned clockwise. The differential is zero when

trimmer 15 is turned fully counterclockwise.
This is the same as ordinary aileron differential
operation, except that the ELEVN down amount

can be adjusted with this trimmer.

(One aileron servo mounted at

the right and at the left)

Fig. 72

The down amount can be ad-
justed with trimmer 15.

Fig. 71

Connect to
receiver channel 7.

Connect to

receiver channel 1

* When connecting the linkage, connect channel 1

to the right wing aileron servo.

• During level flight, smooth left turns without

any sideslip can be made by increasing the right

wing aileron deflection angle without increasing
the left wing aileron deflection angle by turning
on

the aileron differential function. Smooth

right turns can be made by performing the op-
posite operation. Use this differential function

to reduce the aileron down angle rather than the

up angle.

Fig. 70

36

V.TAIL AND FLPRON MIXING

•This combination of mixing functions can be

used with V-Tail gliders and other aircraft with

full ailerons.

• Set Switches 16 and 17 as shown in Fig. 73.
• See FLPRON and V-TAIL sections (Page 34, 35)

for complete instructions on each of these func-
tions.

Fig. 73

V.TAIL AND INDEPENDENT DIFFERENTIAL OPERATION

• This combination can be used aircraft with V-

Tail and full ailerons.

• Set Switches 16 and [17] as shown in Fig. 74.
• Adjust Aileron differential with Trimmer [15].

•See the V.TAIL and aileron differential sections

for a description of the linkages.