Futaba 8SSAP - Manual (Page 37)

ADJUSTMENTS AND FLIGHT TECHNIQUES
ELEVN (AILERON + ELEVATOR)
• This type of mixing can be used with tailless and
delta wing aircraft and flying discs.
• Install and connect the servos as shown in Fig.
64. Always connect the Right side servo to CH1
(Aileron).
• Aileron differential can be adjusted with Trim-
mer 15.
Connect to
channel 2
(elevator).
Connect to
channel 1
(aileron).
Fig. 64
Fig. 65
Use channel 1 (aileron
servo) at the right rudder.
35
V.TAIL (ELEVATOR + RUDDER)
• This mixing is used for gliders, scale model
Bonanzas, and other V-Tail aircraft.
• Install and connect the servos as shown in Fig.
67. Always connect the servo to the Right Rud-
dervator to CH2 (Elevator).
• Set Switches [16] and [17] as shown in Fig. 68.
Connect to
channel 4 (rudder). Connect to
channel 2 (elevator).
Used channel 2 (elevator) for the right rudder.
Fig. 67
Fig. 68
Fig. 69
When connecting the linkage, connect channel 2
(aileron servo) to the right wing rudder.