Adjustments and flight techniques, 2nd atv (conventional), Servo reversing switches – Futaba 8SSAP User Manual

Page 21

ADJUSTMENTS AND FLIGHT TECHNIQUES

•2ND ATV (CONVENTIONAL)

2ND ATV is available on the aileron and elevator
channels. This is the conventional type ATV and is
set using trimmers [34], [35), [36], and [37] on the

transmitter back panel.
Servo movement can be adjusted from 0 to 100%.
These adjustments are retained even if the trans-

mitter battery reaches a full discharge state (Mem-
ory ATV settings are not.).

When the ATV trimmer is turned clockwise, the
steering angle increases. When the ATV trimmer is
turned counterclockwise, the steering angle de-
creases. The steering angle can be adjusted from 0
to 100%.

[34]Aileron right-

[35]Aileron left-

[36] Elevator up

[37] Elevator down

Fig. 24

SERVO REVERSING SWITCHES

These switches reverse the direction of rotation of
the servos. They are convenient when connecting
the linkage.

NORM: Forward
REV:

Reverse

[40] Throttle

[38]Aileron

[39]Elevator-

[42]CH5 switch channel

Fig. 25

[44] Spoiler

[45]Pitch control

[41]Rudder