Servo reverse, Description of functions, Direction setting) – Futaba 3PDF User Manual

Page 24: Change the rotation direction with the + or - key

Description of Functions

Servo Reverse

This function will reverse the rotation direction of the
Steering, Throttle and Channel 3 servos.

If the trim position is not set to 0. The servo will
shift the same amount off neutral on the opposite
side when the servo is reversed.

Access the SYSTEM MODE by pressing the SE-
LECT and MODE Keys simultaneously

Access the Servo Reversing Function screen by
pressing the MODE KEY Once.

Select the channel you wish to change by press-
ing the SELECT KEY.

ST: Steering
TH: Throttle
CH3: Channel 3

(Direction Setting)

Change the rotation direction with the + or - key.

NOR: Forward Direction
REVE: Reverse Direction

Channel 3 Operation

When CH3 (operation function selection) is set to 1P-4P,
the lever direction versus position movement can be
changed.

SELECT

MODE

SELECT

1:
10.5V

SYSTEM
MODE

REVERSE

AUX.SEL

GD.SELCT

MDL.NAME

SELECT

MODE

Initial Screen

Select key

pressed first

System Mode

Group