System components and technical characteristics, Type fw-01 scale interface – Flintec II PC-BASED User Manual
Page 7
FlintWeigh Technical Manual, Rev. 3.03 November 2011
Page 7 of 32
4.
System Components and Technical Characteristics
4.1. Type FW-01 Scale Interface
Fig.4.1 Scale interface, connector side
Fig.4.2 Scale Interface; calibration lock (will be sealed in legal for trade applications)
Digital
Input/Output
Digital
Load cells
USB
Supply 12 V DC
Digital
Input/Output
Digital
Load cells
USB
Supply 12 V DC
Fig.4.3 Scale Interface; connectors
-
Digital load cell connector suitable for connecting RC3D load cells or one/two units of LDU xx.x in
half-duplex mode, see LDU xx.x manual
-
External 12 V supply required for powering the digital load cells / LDU units
Calibration lock