Fleet Engineers INS-04031 - Manual (Page 2)

Installation Sheet #INS-04031 • 1/04 • Rev B 10/04 • Rev. C 12/06
1. Install the end cap on the FB-27 bracket using the end
mud flap bolt. Make sure the tab is located between
the bracket flanges and insert the bolt through both the
slotted holes in the bracket and the slotted hole in the
tab. Correctly position the cap, bracket and flap before
the final tightening of the bolt.
FB-27 Mounting Procedure
& End Cap Installation
Installation Sheet #INS-04031