Fleet Engineers INS-05034 - Manual

Master Multi-Mount
Extension Set
Installation
Installation Sheet #INS-05034
NOTE: These instructions for installing Master Multi-Mount are intended
to be a general guide to help the installer. Because of the large number of pos-
sible mounting configurations, the installer is responsible for the installation
design and for providing adequate clearance around the tire carrier (i.e. tire
clearance, trailer clearance, etc.)
This product may not fit all truck models or types of suspensions. Check truck
or trailer manufacturer for suspension travel specifications. Modifications to
the brackets and/or the fenders may be required. Any modifications are at the
discretion, responsibility and risk of the installer.
1) Replace the 6-1/2 in. bolts in the standard Master
Multi-Mount hardware set with the 10 in. bolts from
the extension set.
2) Between steps 3 & 4 (in the Master Multi-Mount
installation instructions # INS-03029) add the 3-1/2 in.
extension to the 10 in. bolt
between the Master
Multi-Mount frame spacer and the truck frame.
3) Follow the remainder of the Master Multi-Mount
installation instructions.
Installation Sheet # INS-05034 • 3/05 • Rev. B 11/06
Replace 6.5" Bolt with 10" Bolt
Master
Multi-Mount
Frame Spacer
Master Multi-Mount
Extension