FingerTec TimeLine 100 Manual - Manual (Page 7)

7 CONTENTS
ADMIN AFFIRM
Register an administrator to the system by enrolling, fingerprint or password to a user
ID. Press Menu > User Manage > Enroll Admin > Choose enrollment method > Perform
enrolment and Save. After enrolling an administrator, the main menu can only be ac-
cessed by the administrator.
Cleaning Terminal
CLEANING THE BODY
Use a dry cloth to clean the terminal’s body. Do not use any liquids, household cleaners,
aerosol spray, solvents, alcohol, ammonia and abrasive solutions to clean the body of
the terminal because it could damage it.
Restarting and Resetting Terminal
If a feature isn’t functioning as it should, try restarting or resetting the terminals
RESTARTING THE TERMINAL
Push the On/Off button or “reset button” on the terminal to restart the terminal. If you
can’t restart the terminal, or if the problem persists, you might want to reset.
RESETTING THE TERMINAL
Press Menu > Option > System Option > Adv Opt > Rest terminal. Resetting of the ter-
minal will cause all your settings to return to it’s original factory settings. Make sure that
you have backed up all data before you proceed.