FingerTec Face ID 4 Manual - Manual (Page 3)

Stylus
For easy navigation on the
touch screen LCD panel.
T10 Screwdriver
T10 screwdriver to open the
back plate of the terminal for
installation.
Connectors
To connect the wires to a door
lock or a doorbell if required.
1
2
12
11
10
25
A Packet of Bolts
Use the bolts to mount the back
plate of the terminal on the wall.
Measurement Tape
To measure the installation
height to achieve optimum
performance for terminal.
RFID Cards (5 pcs)
FingerTec provides extra cards for
RFID (5pcs) and Mifare Card, (1pc).
Metal Back Plate
Secure this plate on top of the rubber cushion and place the ter-
minal onto it.
USB Extension
To connect to the USB port
of a computer for upload-
ing and downloading of
data.
DC 12V Power Adaptor
Connect the power adapter to
the terminal and plug it into
a standard power outlet to
charge the terminal.
CONTENTS CONTENTS
1 • GETTING STARTED
Viewing the User Guide on the Internet
The User Guide is available in the package when you purchase the product. The User
Guide is also published online at fingertec.com and user.fingertec.com . Choose the
language you prefer to view the User Guide in.
Included Accessories