FingerTec Face ID 4 Manual - Manual (Page 13)

1 CONTENTS CONTENTS CONTENTS CONTENTS
• USER
Enrolling Users
The Face ID can contain up to 00 face templates and 10,000 card users.
FaCe enroLLMent
One face registration would take approximately 0 sec to complete. The terminal
snaps images of your face and generates a dimensional template for storage. Dur-
ing enrollment on the Face ID , please stand straight and do not move your face or
body, and make sure that your face is calm with no extreme expression. For height
between 150cm to 180cm, recommended distance between the Face ID and user
is 0.5m.
To enroll face: Press Menu > New User > User ID > Insert User ID > Select Face > A
green rectangular box will be displayed on the screen > Align your eye position into
the green box > Adjust your head position to align your eyes into the green box >re-
peat 2 times > Face enrollment is complete > Select Privilege > User > Save
Card enroLLMent
The default card for the Face ID is RFID. MiFare card system available upon re-
quests.
To enroll card: Press Menu > New User > User ID > Insert User ID > Select Card >
Wave the card at the scanning area until the screen displays the Card ID > Select
Privilege > User > Save
password enroLLMent
The Face ID offers different enrollment methods and password can be used alone
or in combination with the face recognition methods. The maximum length of a
password is 8 digits.
To enroll password: Press Menu > New User > User ID > Insert User ID > Select
Password > Input password using the touch keypad > OK > Reconfirm password >
OK > Select Privilege > User > Save
Voice / Message
Voice / Message what does it Mean?
“Verified” Identity verification is successful, the Face ID stores the transac-
tion logs and opens the door (if connected to door access)
“Try again please” Identity verification failed because the face is not properly posi-
tioned, the template is not available in the Face ID or the pass-
word is incorrect.