FingerTec Keylock 8800 Manual - Manual (Page 9)

9 CONTENTS
Enroll FP Card Before enrolment of FPCard can be done, administrator needs to
Create fingerprint card first. This enrolment needs fingerprint template to enroll
into the card.
Menu > User Manage > FP Card Mng > Enroll PINcard (Follow the instructions
onscreen)
Create FP Card Use this function to create a card that is ready to accept fingerprint
before you move to the Enroll FP card function.
Menu > User Manage > FP Card Mng > Create FP Card (Follow the instructons
onscreen)
Empty Card Use this function to empty the contents in a card. To delete the con-
tents in the card: Menu > User Manage > FP Card Mng > Empty Card
When you see “Write Suc”, the card has been emptied and can be reused
Password Enrollment Keylock 8800 offers different enrolment methods and pass-
word can be used alone or in combination with fingerprint verification method.
Password consists of combination of number 1-4 and maximum length of pass-
word is 10 digit.
To enroll password Menu > User Manage > Enroll User > Enroll Pwd (Follow the
instrucstions given onscreen) > OK(Save)
To enroll fingerprint and password Menu > User Manage > Enroll User >
Enroll FP & PW (Follow the instructions given onscreen) > OK(Save)
(MiFare model only)
VERIFYING USER
Verification Method What Is It For
1:N (One to Many) 1:N verification does not require any input of your user ID. Place
your finger properly on the scanner and Keylock 8800 takes second
to verify your identity. Press OK/Menu button to get the terminal to
reactivate. You don’t need to identify your User ID before inputting
any biometrics feature for verification. Place your finger for verifi-
cation.
Password Press OK/Menu button to get the terminal to reactivate. Key in
Verification your password to get verified.
Card Verification Press OK/Menu button to get the terminal to reactivate. Wave your
card in front of the terminal to get verified