FingerTec AC100 - Manual (Page 27)

28
NoTe
This feature is NOT available in TA102, TA103 and AC100 models.
CONTENTS
8 • RFID CARD FUNCTION
The fingerprint terminals are versatile and it can accept card verifications. This chapter
covers the Radio Frequency Identification or better known as RFID system. The terminals
accept RFID card with specifications of 64-bit, 125kHz.
Enrollment of RFID Card
RFID can be enrolled alone, with fingerprint or with password. Each RFID card comes with
a unique ID and the terminals will read from the numbers and match it with the card.
Enrollment of RFID is easy. Press Menu > User Manage > Enroll User/Admin > Reg RFID >
OK > Do you want to do new enrollment? > OK > Insert the user ID > OK > Wave the card
to the induction area and the machine will display the card number on the LCD along
with the User ID > OK > The terminal will display User ID-C meaning that the ID is enrolled
with card > OK(Save)
Deleting RFID Card
RFID card can be used again and again but the information in the card must be deleted
first before inserting new information.
Press Menu > User Manage > Delete > Input the User ID and wave the card at the induc-
tion area > The LCD will ask whether you want to delete the User ID-C > The terminal will
ask whether you want to delete User ID > And to delete user. Press OK to all.
Once the card has been emptied, it can be used again.
Changing Card ID
Press Menu > User Manage > Enroll User/Admin > Reg RFID > ESC > Change Card ID > Key
in Original ID > OK > Wave new card > OK (Save)