FingerTec FMM-100 - Manual (Page 7)

7
Card Enrollment
Please check the technical specifications of the device to ensure that this function is sup-
ported before continuing. The default card type is 64-bit, 125kHz RFID card. MIFARE and
HID card systems are available upon request.
Follow the steps below to enroll a card:
Step 1: Press Menu > Users > New User
Step 2: User ID > Key in User ID
This is the unique ID number that represents the user in the devices and software. Make
sure you do not use duplicated ID. The maximum length is ___ digits
Step 3: Select Card > Wave card at the induction area > Screen displays the card ID >
Press OK to save
Step 4: Press Role > Select Role > Select Normal User > Press OK to save
Select Super Admin or other defined role(s) you wish to assign to this user.
Refer to Section 1.5 User Role for more details
Password Enrollment
Password verifications have a lessened security presence in Attendance Reporting and
Access control systems. Despite this, passwords are generally the primary preference for
enrollment. FingerTec devices can accept up to 8-digit passwords in numeric format.
Follow the steps below to enroll password:
Step 1: Press Menu > Users > New User
Step 2: User ID > Key in User ID
This is the unique ID number that represent the user in the devices and software. Make
sure you do not use an existing ID. The maximum length is ___ digits
Step 3: Select Password
Step 4: Insert password for the 1st time > Press OK > Re-enter the password to confirm
Step 5: Press Role > Select Role > Select Normal User > Press OK to save
Select Super Admin or other defined role(s) you wish to assign to this user.
Refer to Section 1.5 User Role for more details