Canon EOS 7D - Manual (Page 159)

159
If you press the , , or button while the
image is displayed on the LCD monitor, the setting screen will appear
on the LCD monitor and you can turn the <6> or <5> dial to set the
respective function. Note that the metering mode cannot be set.
If the shooting mode is , you can press the button and
turn the <6> dial to set the ISO speed.
With the image displayed on the LCD monitor, you can press the
button to set the Auto Lighting Optimizer, image-recording quality for
still photos, and movie recording size. And with f, you can select the
AF point and set the AF area selection mode.
1
Press the <Q> button.
X The settable functions will be
highlighted in blue.
When is selected, the AF
points will also be displayed.
2
Select a function and set it.
Use <9> to select a function.
X The setting of the selected function is
displayed at the screen bottom.
Turn the <5> or <6> dial to
change the setting.
When the selection of the AF point is
enabled, the AF area selection mode
for can be selected with the
button.
Shooting Function Settings
f / R / B / A / i Settings
Q Quick Control
Exposure compensation can be set (except in mode).
The Picture Style, white balance, image-recording quality, and exposure
compensation (except in mode) set for movie shooting will also be
applied to still photos.