Emerson Radio ES9 - Manual (Page 19)

18
3. Press the MEM (Memory) button and then
press preset button “1” on the front panel of
the main unit. “CH 1” appears in the display
confirming that the selected station is now
stored in preset memory number 1.
4. Tune to the next station to be stored, press
the MEM button and then press preset button
“2”.
5. Repeat step 4 using a different preset button each time. To store stations in
preset numbers 6 through 10, press the MEM button, then the “+ 5” button,
and then one of the preset number buttons. For example, to store a station in
preset memory number 6, press MEM, “+ 5”, and “1” buttons in sequence.
6. After storing up to 10 stations in one band press the AM/FM button to switch
bands and repeat the above procedure to store up to 10 additional stations on
the second band.
Recalling Preset Stations
Press AM/FM button to select Tuner mode and the desired band. Press the desired
preset number button on the front panel to recall the desired station. To recall
stations in preset numbers 6 through 10, press the “+ 5” button before pressing
the preset number button.
You may also scroll through the preset station memories by pressing the “CH –”
or “CH +” buttons on the remote control.
Changing Preset Stations
To change a preset station simply tune to the new station which you wish to
memorize and store it in the preset memory location that you wish to change. The
new station will be memorized and the previously stored station will be deleted.
ES9_ib.p65 16/10/2001, 10:28 18