Emerson Radio ES9 - Manual (Page 18)

17
NOTES:
A. Use manual tuning to select weaker stations that might be bypassed during
automatic tuning.
B. If the automatic tuning does not stop on the exact frequency of the station, for
example it stops on 103.55 instead of 103.5, use the manual tuning method
to ‘fine tune’ to the exact frequency of the desired station.
4. Adjust the Volume control as desired. The
volume level indicator appears on the display
for a few seconds while the volume is being
adjusted. The volume level indicator goes
from “00” (minimum) to “15” (maximum).
5. Adjust the Preset Equalizer (EQ) and the Bass and Treble levels as desired.
6. When you are finished listening press the POWER button to turn the system
‘Off’.
Antenna Information
FM
Be sure the FM wire antenna is extended to its full length.
AM
The AM bar antenna is inside the cabinet of the main unit. If AM reception is
weak you may have to reposition the main unit until you find the position that
provides the best AM reception.
Storing Stations In The Tuner Memory
This system allows you to store up to 20 stations (10 AM / 10 FM) in the tuner
preset memories for easy recall at any time.
1. Turn the system ‘On’ and press the AM/FM
button to select the Tuner mode and the
desired band.
2. Tune to the first station you wish to memorize.
ES9_ib.p65 16/10/2001, 10:28 17