Emerson Radio ES9 - Manual (Page 17)

16
• Program Repeat:
Follow the instructions for Programmed
Playback on page 14. When Programmed
Playback begins press the REPEAT/PROG or
REP/PGM buttons twice. The PGM and “ ALL”
indicators appear in the display and the
sequence which you programmed will be
repeated indefinitely.
To cancel all Repeat modes at any time simply press the STOP button.
LISTENING TO THE RADIO
1. Press the POWER button to turn the system
‘On’.
2. Press the AM/FM button to select the Tuner
mode if necessary, and press AM/FM button
again to select the desired band.
NOTE: When the AM band is selected the
“MW” (Medium Wave) indicator appears in
the display.
3. Press the TUN (Tuning) or buttons on the front panel only to tune to
the desired station. The and buttons on the remote control cannot
be used for radio tuning.
• Automatic Tuning:
Press and hold the TUN or buttons until the display starts to scan,
and then release the buttons. The Tuner will stop on the first strong station it
finds Repeat this procedure until the desired frequency appears in the display.
• Manual Tuning:
Repeatedly press the TUN or buttons to manually move the display
up or down until you reach the frequency of the desired station.
ES9_ib.p65 16/10/2001, 10:28 16