Eliminator Lighting Flash 192 - Manual (Page 2)

DMX Mode:
O perating through a DMX controller gives the user the freedom to create their own programs tailored
to their own individual needs. The Flash 192 has 4 DMX channels; Dimming, Strobing, Sound Active,
and Fading.
1. This function will allow you to control each individual fixture’s traits with a standard DMX 512
controller.
2. To run your fixture in DMX mode press the UP or DOWN buttons until “AXXX” is displayed. “XXX”
represents the current displayed address. Use the UP or DOWN buttons to select your desired
DMX address.
3. After you have chosen your desired DMX address plug in the fixture via the XLR connections to
any standard DMX controller.
Auto Mode:
1. Plug the fixture in and press the UP or DOWN buttons until “AUdi” is displayed, and press
ENTER. After you press ENTER, “Pr.01” will be displayed.
2. Press the ENTER button again to access the strobe speed. After pressing ENTER, “SP.XX” will be
displayed, use the UP and DOWN buttons to adjust the strobe speed.
Sound Active Mode:
1. Plug the fixture in and press the UP or DOWN buttons until “Auto” is displayed, and press
ENTER. After you press ENTER, “Pr.01” will be displayed.
2. Press the ENTER button again to access the strobe speed. After pressing ENTER, “SP.XX” will be
displayed, use the UP and DOWN buttons to adjust the strobe speed.
Default:
1. Plug the fixture in and press the UP or DOWN buttons until “dEFA” is displayed, and press
ENTER.
2. Press the UP or DOWN buttons so that YES is displayed, and press ENTER. The unit will now
revert back to the default settings.
Master-Slave Configuration:
1. Set the “Master” unit to your desired operating mode, then connect the “Slave” units.
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our
1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.
DMX TRAITS: 4 CHANNELS
CHANNEL 1: DIMMER/STROBE CHANNEL 3: SOUND ACTIVE
1 - 10 = ON 0-10 = NO FUNCTION
11 - 20 = BLACKOUT 11-255 = SOUND ACTIVE STROBING
21 - 255 = DIMMER 0%-100%
CHANNEL 2: STROBE CHANNEL 4: FADING
0 - 10 = ON 0-10 = NO FUNCTION
11 - 255 = STROBING SLOW - FAST 11-255 = FADING SLOW - FAST