ebm-papst VDC-3-49.15 - Manual (Page 14)

VDC-3-49.15
Assembly instructions
Article No.: 194 0005 008 · Version: V1.0 · dated 08.11.2011 · Page 14 of 14
ebm-papst St. Georgen GmbH & Co. KG · Hermann-Papst-Straße 1 · 78112 St. Georgen · Phone: +49 7724 81-0 · Fax: +49 7724 81-1309 · www.ebmpapst.com · [email protected]
Ori
g
inal installation
8 DECLARATION OF INCORPORATION
Declaration of Incorporation
For the incorporation of an incomplete machine acc. to
Article 1, Par. 1, lit. g); Article 2, Par. g); Annex II, No. 1, Par. B
of the Machinery Directive 2006/42/EC
The manufacturer:
Name: ebm-papst St. Georgen GmbH & Co. KG
Address: Hermann-Papst-Straße 1
D-78112 St. Georgen i. Schwarzwald, Germany
declares for the partly completed machinery specified below
VDC-3-49.15 motor series
z that it is not an independently functioning machine as defined by Article 2 g) of the Machinery Directive specified below and, for this reason, does not conform
in all parts to the Basic safety and health protection requirements (Annex I).
z the application and compliance with the following
harmonised European Standards or other standards and/or technical requirements etc.
Source Date of issue Reference to Directive
EN ISO 14121-1 2007-09 Machinery Directive 2006/42/EC
EN 61800-5-1 2007-09
Adjustable speed electrical power drive systems - Part 5-1:
Safety requirements. Electrical, thermal and energy requirements
EN 61800-3 2004-12 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
z that the product(s) covered by this Declaration must not be put into service until the machinery into which this incomplete machine is to be incorporated or of
which it is a component has been found and declared to be in conformity with the protection requirements of the Machinery Directive.
z that the specific Technical Documents in accordance with Annex VII B have been created and are available in their entirety.
z that by request, the specific documents can be transmitted to the government authorities via data medium, electronically or on paper.
The protective rights remain with the manufacturer specified above.
St.Georgen, Germany / 2010-09-01
Place/Date p.p. Martin Csermak, Development Manager