Canon DC40 - Manual (Page 84)

84
WL. REMOTE: Allows the camcorder to be operated with the wireless controller.
BEEP: A beep will accompany some operations like turning on the camcorder, the self-
timer countdown, etc. It also serves as a warning beep under unusual conditions.
POWER SAVE: In order to save power when the camcorder is powered by a battery
pack, it will automatically shut off if left without any operation for five minutes.
Approximately 30 seconds before the camcorder shuts off the message “
AUTO
POWER OFF” will appear.
FILE NOS.: Select the image numbering method to be used on a new memory card or
disc.
Images are automatically assigned consecutive image numbers from 0101 to 9900, and
stored in folders containing up to 100 images. Folders are numbered from 101 to 998.
[RESET]: Image numbering will start anew from 101-0101 every time you insert a new
memory card or disc. If it already contains image files, a new image will be given the
number following that of the last image on the card or disc.
[CONTINUOUS]: Image numbering will start from the number following that of the last
image recorded with the camcorder. If the memory card or disc already contains an image
with a larger image number, a new image will be given the number following that of the
last image on the recording media. This method is useful for organizing images on a
computer. We recommend using the [CONTINUOUS] setting.

The [FILE NOS.] setting is common to the memory card and the disc.
TV TYPE: In order to display the picture in full and in the correct aspect ratio, select the
setting according to the type of television to which you will connect the camcorder.
[NORMAL TV]: TV sets with 4:3 aspect ratio.
[WIDE TV]: TV sets with 16:9 aspect ratio.
Date/Time Setup
DATE/TIME SETUP
DATE FORMAT: Changes the displayed date format (including the date format for
printing).
T.ZONE/DST
28
DATE/TIME
DATE FORMAT Y.M.D (2006.1.1 AM12:00),
M.D,Y (JAN.1,2006 12:00AM),
D.M.Y (1.JAN.2006 12:00AM)
Menu Items Setting Options
CAMERA PLAY