beautypg.com

Canon DC40 User Manual

Page 128

background image

128

Message

Explanation

PAPER ERROR

There is a problem with the paper. Wrong paper size is inserted, the ink
cannot be used with the selected paper or paper output tray is open.

NO PAPER

Paper is not correctly inserted or there is no paper.

PAPER JAM

The paper jammed during printing. Select [STOP] to cancel printing.
After removing the paper, set some paper again and retry printing.

INK ERROR

There is a problem with the ink.

NO INK

The ink cartridge is not inserted or is out of ink.

LOW INK LEVEL

The ink cartridge needs to be replaced soon. Select [CONTINUE] to
restart printing.

WASTE TANK FULL

Waste tank is full. Select [CONTINUE] to restart printing. Consult a
Canon Service Center listed in the Contact List provided with the printer
manual to replace the waste ink absorber.

• FILE ERROR
• CANNOT PRINT!

You attempted to print an image that was recorded with another
camcorder, with a different compression, or was edited on a computer.

COULD NOT PRINT X
IMAGES

You attempted to use the print order settings to print X images that were
recorded with another camcorder, with a different compression or were
edited on a computer.

SET

PRINT ORDER

No still image on the memory card has been marked with a

print

order.

PRINT ORDER

ERROR

You attempted to set more than 998 still images in the print order.

CANNOT TRIM

You attempted to trim an image that was recorded with another
camcorder.

READJUST TRIMMING

You changed the print style after you set the trimming settings.

PRINTER ERROR

Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the error still persists, refer to the printer’s instruction manual
and contact the appropriate customer support center or service center.

PRINT ERROR

Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status.
When you are printing using the

button, check the print settings.

HARDWARE ERROR

Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the printer is equipped with a battery, it might be exhausted. In
such case, turn off the printer, replace the battery and turn it back on.

COMMUNICATION
ERROR

The printer is experiencing a data transfer error. Cancel printing,
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. When you are printing
using the

button, check the print settings.

Or, you attempted to print from a memory card that contains a large
number of images. Reduce the number of images.

CHECK PRINT
SETTINGS

The print setting cannot be used for printing with the

button.

INCOMPATIBLE PAPER
SIZE

The paper settings of the camcorder conflict with the printer’s settings.

PRINTER IN USE

The printer is in use. Check the printer status.

PAPER LEVER ERROR

Paper lever error occurred. Adjust the paper selection lever to the proper
position.

PRINTER COVER OPEN

Close the printer cover securely.

NO PRINTHEAD

No print head is installed in the printer or the print head is defective.