Digilent 410-209P-KIT REV.C - Manual (Page 12)

chipKIT Uno32 Reference Manual
www.digilentinc.com page 12 of 17
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
Pinout Tables
The following tables give the relationship
between the chipKIT digital pin numbers, the
connector pin numbers and the microcontroller
pin numbers.
In the following tables, columns labeled
chipKIT pin # refer to the digital pin number.
This is the value that is passed to the
pinMode(), digitalRead(), digitalWrite() and
other functions to refer to the pin.
For most pins, this pin number will agree with
the pin number labeled on the board. For the
pins whose function can be switched using
jumpers, the pin number labeled on the board
is correct when the jumper is in the ‘normal’
position.
For example: The normal position for JP4 is
the RD4 position. The digital pin number for
the microcontroller signal RD4 is 10. With JP4
in the RD4 position, digital pin 10 is connected
to the pin labeled 10 on the board. The
alternate position for JP4 is the RG9 position.
The digital pin number for the microcontroller
signal RG9 is 44. With JP4 in the RG9
position, digital pin 44 is connected to the pin
labeled 10 on the board, and digital pin 10 is
not connected.
The pin labeled 10 on the board is connected
to connector J5 pin 5. This is shown as J5-05
in the following tables. In the ‘Pinout Table by
Shield Connector Pin’ table below, J5-05 is
shown has being either chipKIT pin # 10 or 44.
J5-04 is connected to chipKIT pin # 10 when
JP4 is in the RD4 position and is connected to
chipKIT pin # 44 when in the RG9 position.
Pinout Table by Logical Pin Number
chipKIT
Pin #
Connector
Pin #
PIC32
Pin #
PIC32 Signal Notes
0 J6-01 34 U1RX/SDI1/RF2
1 J6-03 33 U1TX/SDO1/RF3
2 J6-05 42 IC1/RTCC/INT1/RD8
3 J6-07 46 OC1/RD0
4 J6-09 59 RF1
5 J6-11 49 OC2/RD1
6 J6-13 50 OC3/RD2
7 J6-15 43 IC2/U1CTS/INT2/RD9
8 J5-01 44 IC3/PMCS2/PMA15/INT3/RD10
9 J5-03 51 OC4/RD3
10 J5-05 52 PMWR/OC5/IC5/CN13/RD4 selected by JP4, also on J8-6
11 J5-07 6 SDO2/PMA3/CN10/RG8 selected by JP5, also on J8-1
12 J5-09 5 SDI2/PMA5/CN8/RG7 selected by JP7, also on J8-4
13 J5-11 4 SCK2/PMA5/CN8/RG6 also on J8-3, User LED LD4r
14/A0 J7-01 14 C2IN-/AN2/SS1/CN4/RB2
15/A1 J7-03 12 C1IN-/AN4/CN6/RB4
16/A2 J7-05 21 U2CTS/C1OUT/AN8/RB8
17/A3 J7-07 23 TMS/CVREFOUT/PMA13/AN10/RB10
18/A4 J7-09 27 TCK/PMA11/AN12/RB12 selected by JP6