Digilent 410-295P-KIT - Manual (Page 3)

ChipKIT Pro MX4 Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 3 of 37
Overview
ChipKIT Pro MX4 is the new name for Cerebot MX4ck. This board retains all functionality of the Cerebot MX4ck.
The ChipKIT Pro MX4 is a microcontroller development board based on the Microchip PIC32MX460F512L, a
member of the 32-bit PIC32 microcontroller family. It is compatible with Digilent’s line of Pmod™ peripheral
modules, and is suitable for use with the Microchip MPLAB
®
IDE tools. The ChipKIT Pro MX4 is also compatible for
use with the MPIDE development environment. ChipKIT combined with MPIDE is a PIC32 based system compatible
with many existing Arduino™ code examples, reference materials and other resources.
ChipKIT Pro MX4]
Features of the ChipKIT Pro MX4 Include:
• a PIC32MX460F512L microcontroller
• support for programming and debugging within
the Microchip MPLAB development
environment
• support for programming within the chipKIT
MPIDE development environment
• nine Pmod connectors for Digilent peripheral
module boards
• eight hobby RC servo connectors
• USB 2.0 Device, Host, and OTG support
• two push buttons
• four LEDs
• multiple power supply options, including USB
powered
• ESD protection and short circuit protection for
all I/O pins.
Features of the PIC32MX460F512L Include
• 512KB internal program flash memory
• 32KB internal SRAM memory
• USB 2.0 compliant full-speed On-The-Go (OTG)
controller with dedicated DMA channel
• two serial peripheral interfaces (SPI)
•
two UART serial interfaces
• two I
2
C serial interfaces
• five 16-bit timer/counters
• five timer capture inputs
• five compare/PWM outputs
• sixteen 10-bit analog inputs
• two analog comparators
•