CyberPower Systems PowerPanel Power Supply System - Manual (Page 7)

PowerPanel ® Business Edition
Copyright © 2006-2007 Cyber Power Systems, Inc. All rights reserved. 6
• Status: Displays the present operating status of the Battery Backup.
o
Normal: The system status is normal.
o
*Fault: The system is in fault state due to an internal malfunction.
o
*Overheat: The temperature exceeds the normal temperature
threshold.
o
Unknown: This is an abnormal status.
• *Temperature: The present internal operating temperature of the Battery
Backup case.
View Battery Backup Information
Information
The Battery Backup Information page shows a summary of information about
the Battery Backup as follows:
• UPS Model: The model name of the Battery Backup.
• Hardware Version: The hardware version of the Battery Backup.
• *Serial Number: The serial number of the Battery Backup.
• UPS Type: The type of the Battery Backup. It may be 「On Line」 or 「Line
Interactive 」.
• V.A: The Volt-Amp specification of the Battery Backup.
• Power: The maximum power supplied by the Battery Backup (Watts).
• *Maximum Current: The maximum output current of the Battery Backup
(Amps).
• Voltage: The output voltage of the Battery Backup (Volts).
• *Frequency: The output frequency of the Battery Backup (Hz).
• Battery Replacement Date: The date that the batteries were last replaced.
The normal lifetime of the batteries is 3 years. You can click "reset" button
to configure the replaced date. The replaced date only can be configured to
the date before the day while you are configuring it.
• *Standalone Outlets: The number of standalone outlets.
• *External Batteries: The number of external battery cabinets.
*: These details may not be available on all models.