beautypg.com

Advance - configure in wild apply mode, Configure overall action settings – CyberPower Systems PowerPanel Power Supply System User Manual

Page 24

background image

PowerPanel

®

Business Edition

Copyright © 2006-2007 Cyber Power Systems, Inc. All rights reserved.

23

Shutdown Sequence:

o

Initiate a shutdown sequence for this event: If you enable this

option, the Battery Backup will initiate a shutdown sequence when the

event occurs.

ƒ

Initiate a shutdown sequence when this event occurs for

a specific time: Sets the delay time to initiate the shutdown
sequence. (0 means immediately)

Note: These functions may not be available on all models

ADVANCE - CONFIGURE IN WILD APPLY MODE

If you want to apply one event setting to other events, you will need to open
wild apply mode by click top-right icon.

this event: Apply the setting to this event. This is default setting.

severity events: Apply the setting to same severity level events. It may be

information, warning, or severe level.

all events: Apply the setting to all events.

Configure Overall Action Settings

The Action Settings page allows you to configure detailed settings such as OS
Shutdown, E-mail, E-mail Receivers and Notification Receivers for some actions.

Shutdown

o

The approximate time for OS shutdown to complete: Sets the

estimated shutdown time of the OS. The time is used by the Battery

Backup to delay shutdown Battery Backup itself.

o

The shutdown type is: Sets which shutdown type you want to use.

"Hibernate" will be invisible if your system doesn't support hibernation.

You can enable/disable hibernation function in Windows Control Panel

Power Options → Hibernate tab. If your system doesn't support

hibernation, that "Hibernate" tab will be invisible.
Configuration Options: [Shutdown][Hibernate]

Note

: When OS shutdown event occurs, if there are any unnamed

files to be saved, those files will be saved automatically to folder
named "Auto Saved" in My Documents for each logged in user.

E-mail

o

The address of SMTP server is: Sets the SMTP server address

according to your SMTP configuration.

o

The sender name is and the sender address is: Sets the sender

information for the e-mail.