CyberPower Systems PowerPanel Power Supply System User Manual

Page 20

PowerPanel

Business Edition

Leaves bypass
mode

Leaves bypass mode and switch to line mode or battery
mode, battery power will be used.

Battery-test is
successful

The Battery test was successful, battery power is normal.

Battery-test
initiated

The Battery test initiated to verify that battery power can
be provided normally.

Battery is charging

The battery starts to charge, the battery capacity will
increase.

Battery stopped
charging

The battery stopped charging, the battery capacity will
stop increasing.

Battery is
discharging

The battery is being discharged, the battery capacity will
decrease.

Battery stopped
discharging

Battery stopped discharging; the battery capacity will
stop decreasing.

Calibration initiated

Calibration was initiated; the battery runtime will be
evaluated.

Calibration finished

Calibration finished, battery power no longer is used.

Calibration canceled

Calibration was canceled; the battery runtime evaluation
was interrupted.

Output voltage is
boosted

Output voltage is boosted from a lower level.

Output voltage is no
longer be boosted

Output voltage is normal and the boost will stop.

Output voltage is
bucked

Output voltage is bucked from a higher level.

Output voltage is no
longer be bucked

Output voltage is normal and the buck will stop.

Battery capacity is
normal

The battery capacity is normal and no longer critically
low.

Battery Backup is
no longer faulty

The battery backup is no longer faulty and is working
normally.

Utility power has
restored

Utility power has restored, no longer using battery power.